Electric Guitar Parts - Super Savings! Save up to 36%

Super Savings! Up to 36% off on Electric Guitar Parts at Tritone Guitars. Top brands include Switchcraft, Fender, CTS, T-Rex FUELTANK-JUNIOR Electric Guitar Electronics, DOPRO, Hipshot, Kmise, StewMac, Seymour Duncan, The Art Of Tone, Schaller, Faber®, & BYOGuitar. Hurry! Limited time offers. Offers valid only while supplies last.

Switchcraft 152B 1/4-Inch Stereo TRS Deep Panel Jack with Washer and Nut, Nickel Finish
By Switchcraft
In Stock
You Save: 2%

mpn: 152B, ean: 0637963207001,

4.8 out of 5 stars with 85 reviews
Switchcraft 152B Stereo TRS 1/4 Inch Female Deep Panel Jack. Nickel Finish.Made in USA. Heavy duty metal construction.. Nickel Finish.

Fender Standard Series Telecaster Bridge Assembly - Chrome
By Fender
In Stock
You Save: 36%

mpn: 0053354000, ean: 0717669074180,

4.8 out of 5 stars with 58 reviews
Made for Fender instruments in a variety of vintage-style and contemporary models.Chrome-plated bridge plate with six adjustable block-style saddles. Assembly includes intonations screws, springs, and height adjustment screws. Does not include bridge or pickup mounting hardware. Includes saddle height adjust wrench. Bridge Plate Dimensions: 3.93'' x 3.148''. 4-screw mounting design. Mounting hole spacing is approximately 2-7/32''. Used in most Standard Series (Mexico) Telecaster models

CTS 500K Push Pull Short Shaft Audio Taper Potentiometers - Pair (2X) - Includes Wiring Diagram
In Stock

mpn: 4334248425, ean: 0691852992171,

4.4 out of 5 stars with 94 reviews
Quality CTS product, allowing for wiring modification and variations without the need to physically modify the body of the guitar. If your guitar has a control plate you'll need the long shaft version.High Quality CTS Push Pull Pot - brass bushing and shaft. Short Shaft (3/8'' bushing height), 24-tooth fine spline shaft. Double Pole Double Throw allows modification including coil splits, coil taps, phase shifting. Wiring diagram included. Not intended for use with import guitars using metric

T-Rex FUELTANK-JUNIOR Electric Guitar Electronics
By T-Rex FUELTANK-JUNIOR Electric Guitar Electronics
In Stock

mpn: FuelTank Junior, ean: 0811059013329,

4.8 out of 5 stars with 114 reviews
The T-REX Fuel Tank Junior Pedalboard Power Supply with Five 9V Outputs and a Built-In Voltage Selector for Worldwide Use is a True Power Supply with Real Internal Transformer.5 x 9VDC isolated outputs (120 mA each). Each output delivers 120mA. Delivers clean, quiet power.

Dopro Set of 4 LP Guitar Reflector Knobs Black with Chrome Cap Top Hat Knobs For SG Epiphone Les Paul
In Stock

mpn: 43237-2, ean: 0647731180429,

4.7 out of 5 stars with 120 reviews
These are metric size knobs for SG,Epiphone Les Pauls or most guitars made in Asian countries which have 5.8mm diameter pots, they DO NOT fit most USA Gibson Les Pauls which use larger diameter pots, such as CTS Pots. Black with Chrome Aluminum Cap. High quality knobs with faultless finish, not cheap and inferior knobs in the market; Please be sure to verify the pots diameter of your guitar before you order the item. Please contact us when you have problem with the item before leaving feedback,

Hipshot 6GLO Grip-Lock Locking Guitar Tuning Machines 3+3 Chrome
By Hipshot
In Stock

mpn: 6K2GL0C, ean: 0889406420694,

4.0 out of 5 stars with 58 reviews
Grip-Lock Open Guitar Tuners by Hipshot take the chore out of string changes and increase your tuning stability at the same time. Instead of your old, time consuming string changing ritual, simply pull the string through the hole and tighten the thumbwheel. A small pin inside the string post will grip your string and lock it in place for worry free tuning!18:1 tuning ratio for super fine adjustment. String post hole fits strings up to .060'' (we can enlarge to .090'' by special order).

Fender Hendrix Voodoo Child Cable, Purple
By Fender
In Stock
You Save: 4%

mpn: 990823001, ean: 0885978908783,

4.6 out of 5 stars with 122 reviews
Jimi Hendrix set the music world on fire with his rule-breaking playing style and one-of-a-kind tone. Celebrate his onstage magic by plugging in his iconic coiled cable, featuring Fender ; reliability and vintage-style construction.30' Coiled cable. Vintage Fender Pancake right-angle and jumbo plug straight end connectors. 6.5mm PVC jacket for low noise. 95% copper coverage shield for less noise interference. OFC copper-stranded braided shield for superior sound quality and frequency balance.

Fender 4-Button Amplifier Footswitch for Mode/Tuner, Bank, Delay with 1/4-Inch Jack
By Fender
In Stock
You Save: 27%

mpn: 0080996000, ean: 0885978066322,

4.4 out of 5 stars with 139 reviews
Unlock the countless various patches, effects and tuner all smartly and affordably available in the Mustang amps. This very durable Stage to Studio worthy Fender Footswitch includes the ¼” speaker cable connects with the amp.If you own a Mustang III, IV or V this is a must have product to propel your performance!Works with Mustang III, IV, V Combo Amplifiers and Mustang V Head. Allows user to scroll easily between the Mustang amp bank patches / sounds. Set Tap/Tempo Delay effect with your

Kmise A1098 1 Piece Double Course Guitar Truss Rod 16.5" Length 420mm Steel A3
By Kmise
In Stock

mpn: A1098, ean: 0634458572019,

4.4 out of 5 stars with 117 reviews
100% brand new high quality and testing is fine Item 100% like the picture shown Guitar truss rod. Two way or two course rod type. Total length is 420mm rod For making or repairs. Rod head: Outside diameter 9mm Inside diameter:5mm The color of adhesive tape maybe different Material-1/4 ÅA3 Package Include: 1 X Guitar truss rodGuitar truss rod. Two way or two course rod type. Total length is 420mm rod For making or repairs.

Fender Mexico Vintage Strat Bridge Assemblies (005-4619-000)
By Fender
SKU: #142383
In Stock

sku: 142383, mpn: 0054619000, ean: 0717669074241,

4.4 out of 5 stars with 61 reviews
Made for Fender instruments in a variety of vintage-style and contemporary models.Six saddle vintage-style bridge assembly with stamped steel saddles. Vintage 2-3/16'' mounting spacing. Die-cast tremolo block design. Threading will accept standard 10/32 tremolo arm. Does not include mounting hardware, tremolo claw, tremolo springs or tremolo arm. Will mount to USA Stratocaster Body (Vintage Bridge) and Stratocaster Body (Vintage Bridge).

StewMac Neck Shims for Guitar, Shaped, Set of 3
By StewMac
In Stock

mpn: AN2135,

4.3 out of 5 stars with 31 reviews
Full contact, precisely taperedTo change the angle of a bolt-on neck, players and repair shops have used shims for years. We've seen everything from matchbook covers to guitar picks stuck in neck joints.Those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. As Dan Erlewine describes in his Guitar Player Repair Guide:''This gap may cause an upward kink in the neck. And many players feel they lose tone unless firm

Kmise Electric Guitar Neck for Gibson Les Paul Replacement Mahogany Rosewood 22 Fret Black
By Kmise
In Stock
You Save: 18%

mpn: MI0583, ean: 0634458766951,

4.9 out of 5 stars with 17 reviews
Specification Material information Material:Maple Finish:Black Gloss Binding:ABS Position Marker:Abalone Fret:Cupronickel Nut:ABS Dimension information Tuner Hole:8.5mm Width at Nut:43mm Scale Length:628mm / 24.72 inch With at Heel:57mm(± 0.5 mm Deviation) Thickness at Heel:27mm Truss Rod:Two-way adjustable, 4mm Allen wrench Package Include1 x Guitar Neck1. Designed for LP electric guitar neck replacement with beautiful black gloss finish and white abalone inlay. 2. Sqare heel with 56-57mm

Seymour Duncan JB and Jazz Set Electric Guitar Electronics
By Seymour Duncan
In Stock
You Save: 1%

mpn: SH-4 & SH-2, ean: 0400000033914,

4.3 out of 5 stars with 141 reviews
Seymour created this classic humbucker combination while in England in 1974, and it remains his favorite set of pickups to this day an SH-4 JB for the bridge and SH-2n Jazz Model for the neck. Together they provide one of the most versatile humbucker ever built. The JB Model humbucker is our most popular pickup of all time. It adds juice and versatility to the bridge position of any humbucker equipped guitar. With its hot coils, and alnico 5 bar magnet, this pickup delivers an unmistakable

Deluxe Wiring Kit for Fender Strat - .022 Orange Drop Cap - Stratocaster
By The Art Of Tone
In Stock

mpn: The-1146, ean: 0091131243442,

4.9 out of 5 stars with 46 reviews
TAOT Deluxe Wiring Kit for Fender® Stratocaster® w/ Wiring Diagram. Featuring CTS high quality 450G series potentiometers designed specifically for guitars. 1/4'' high X 3/8'' diameter bushing with vintage taper volume pot with more gradual taper and greater volume control. Pots require 3/8'' mounting hole. All parts in the kit are high quality USA sized parts and are not compatible with import guitars using metric sizing.1X CTS 450G Series 250K Dish Back Short Split Shaft Vintage Audio Taper

Schaller Roller Tunematic Chrome Adj. 2-29/32" Post Allparts GB-0590-010
By Schaller
SKU: #MPP-GB-0590-010
In Stock
You Save: 10%

sku: MPP-GB-0590-010, mpn: GB-0590-010, ean: 0645208008283,

4.1 out of 5 stars with 90 reviews
Schaller Roller tunematic, Chrome, Adjustable string spacing, 2-29/32'' Post spacing. The bridge design allows 3-dimensional adjustment. Height, intonation and individual string spacing can be adjusted. Roller bridge saddles.Genuine AllParts Item.

FABER TONE-LOCK BRIDGE, in GLOSS NICKEL, for ALL GIBSON, EPIPHONE and MANY OTHER GUITARS. ABR-1 & 4MM. For Nashville & Imported Guitars using large bridge posts, See Important Details!
By Faber®
In Stock

ean: 0636836075945,

4.9 out of 5 stars with 53 reviews
Get a Faber® Tone-LockTM Bridge for your guitar. Not only will you have the convenience of the bridge staying in place during string changes, you will also benefit from increasedsustain and solid intonation - once you lock down the bridge, it will not move, so intonation stays perfect. Other finish colors, such as Aged Nickel, Gloss Gold and Aged Gold, and saddle configurations available on our website. Specifications Tone-LockTM Bridge: Alloy: 70% zinc, 30% aluminum Net Weight, including

Duncan Hot Rodded Humbucker Pickup Set, Nickel+Les Paul Wiring Harness Long
By Seymour Duncan
In Stock

mpn: BOK-11108-13-NC+LP50-L, ean: 0759681031246,

4.4 out of 5 stars with 65 reviews
This listing is for a brand new set of Seymour Duncan Hot Rodded Humbucker Set in Nickel. Also included at no extra charge is a 920D Custom Shop Pre-wired Harness with long shaft 500k CTS pots and Orange Drop .022F Capacitors. ($49.99 value) Hot Rodded Humbucker Set, Nickel The JB owes its popularity to over-wound coils, which provide high output with just the right amount of sustain and distortion--perfect for searing leads. Seymour matched the JB with a Jazz Model in the neck for calibrated

Seymour Duncan 11205-02 SHR-1b Hot Rails Strat Guitar Pickup Bridge Black
By Seymour Duncan
SKU: #2783
In Stock
You Save: 2%

sku: 2783, mpn: SHR-1, ean: 7756012818753,

4.6 out of 5 stars with 56 reviews
Seymour Duncan's Hot Rails pickup is one of the highest out pickups Duncan makes, and also one of the most popular. The Hot Rails uses a pair of blades coupled with bulletproof ceramic magnet and intense coil windings to make a pickup that's full and fat with a ton of sustain - perfect for classic rock, but also lending itself completely well to more aggressive tones such as garage rock or metal. Best of all, these humbuckers - and all their beefy tone - fits inside a single-coil-sized pickup.

Blizzard of 59 - Vintage Humbucker Set - Nickel
By BYOGuitar
In Stock

mpn: BYO-B59S-NICKEL, ean: 4913173109226,

4.1 out of 5 stars with 116 reviews
Blizzard of 59 pickups deliver vintage PAF tones. Alnico II magnets produce sweet and round highs, rich midrange and warm, tight lows. Vintage tone at its best. Available in black, zebra and nickel. All with vintage braided shielded lead wires. Vacuum wax potted. Sold as a set.Magnets: A2. DCR: 7.3k Neck, 8.1k Bridge. 42 Gauge Plain Enamel. Vintage Braided Shielded lead wires.. 1.97'' (50mm) pole spacing.

Seymour Duncan SH-1n '59 Model 4-Conductor Pickup - Black Neck
By Seymour Duncan
SKU: #5807
In Stock
You Save: 1%

sku: 5807, mpn: SH-1, ean: 0665760893004,

4.4 out of 5 stars with 50 reviews
The '59 Model SH-1 is Seymour Duncan's version of the classic Seth Lover PAF (Patent Applied For) humbucking pickup used on the Gibson Les Paul in the late 1950s. The SH-1 has plain enamel wire, a long-legged bottom plate, and 4-conductor cable to give you modern wiring flexibility. They've even left off the Seymour Duncan logo to give you authentic visuals. This reincarnation of the classic delivers a slightly more scooped midrange than the Seth Lover model and is vacuum wax potted for

Viewing Page 1 of 5

View more products in Guitar & Bass Accessories.
Feel free to Browse Our Catalog.

Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - tritone-guitars.com. All Rights Reserved.